Sun Cluster Data Service for ClearCase. Hardware Configuration

Daddy, what are you doing under the table? Screwing up?
Anna, my 2 years old daughter

Anna really likes to help me, especially pressing a keys when I am also typing. As usual I tried to keep her away this time, of cause without much success. Therefore to plug all cards took longer as expected.

I was also surprised that Gigabit NICs work with direct connected normal (not crossover) patch cords.

Both machines are connected to the StorEdge Box on the same SCSI bus, therefore I must change scsi-initiator-id on one of them to avoid SCSI ID conflicts. It was easier to do on karblade. Just because SunBlade 100 has internally only IDE Bus, I can set it globally without any additional impact.

Configuration:

On karblade change scsi-initiator-id, test disk and show available network interfaces:

ok printenv scsi-initiator-id
scsi-initiator-id =   7
ok setenv scsi-initiator-id 6
scsi-initiator-id =   6
ok setenv auto-boot? false
auto-boot? =          false
ok reset-all
Reseting...

ok probe-scsi-all
/pci@1f,0/pci@5/pci@1/SUNW,isptwo@4
Target 1
Unit 0   Disk     FUJITSU MAN3184M SUN18G 1502
Target 4
Unit 0   Disk     SEAGATE ST318404LSUN18G 4203

ok setenv auto-boot? true
auto-boot? =         true
ok show-nets
a) /pci@1f,0/network@c,1
b) /pci@1f,0/pci@5/pci@1/SUNW,hme@0,1
c) /pci@1f,0/pci@5/pci@0/network@1
d) /pci@1f,0/pci@5/pci@0/network@0
q) NO SELECTION
Enter Selection, q to quit: q
ok

On karu60 test disk and show available network interfaces:

{0} ok printenv scsi-initiator-id
scsi-initiator-id =   7
{0} ok probe-scsi-all
/pci@1f,4000/pci@1/scsi@3,1
Target 1
  Unit 0   Disk     FUJITSU MAN3184M SUN18G 1502
Target 4
  Unit 0   Disk     SEAGATE ST318404LSUN18G 4203

{0} ok show-nets
a) /pci@1f,2000/pci@1/network@1
b) /pci@1f,2000/pci@1/network@0
c) /pci@1f,4000/network@1,1
q) NO SELECTION
Enter Selection, q to quit: q
{0} ok

Everything is ready for Operation System installation.